Same-day appointments across the San Fernando Valley when you call before 3pm.
Mon–Fri 7am–7pm · Sat 8am–5pm info@skillgaragedoorrepair.com
Swing & sliding gates

Driveway gate repair

A gate that drags, sags or will not latch is usually telling you that a hinge, a post or a roller has given up. We repair iron, wood, steel and aluminium driveway gates — re-hanging the gate, resetting the posts and replacing the hardware that has worn out.

Iron, wood, steel and aluminium gates repaired Posts reset, hinges and rollers replaced Manual and automatic gates, swing and slide
Driveway gate repair — garage and gate work in the San Fernando Valley
Symptoms

What a failing gate feels like

Gates announce their problems physically: the gate that used to clear the ground now scrapes it, the latch needs a shoulder to close, the outer edge sags a couple of centimetres. Those are fixable adjustments now and expensive problems later if the post or the frame is allowed to keep moving.

  • Gate sags at the latch end and no longer lines up
  • Gate drags or scrapes on the driveway when swinging
  • Hinges stiff, squealing or pulling out of the post
  • Post leaning or wobbling where it meets the concrete
  • Sliding gate jumping off the track or sticking
  • Latch, drop bolt or catch not engaging
  • Gate frame cracked or welds failing at the hinge side
  • Gate stops partway when opened by the operator
What we repair

Hardware first, structure when it is needed

Most gate problems come from a small number of parts. We start by freeing and adjusting the mechanism, because a gate that is simply seized at the hinge does not need replacing.

  • Hinge replacement and re-hanging, bolt-on and weld-on
  • Post resets and re-anchoring to concrete footings
  • Sliding gate rollers, guide rollers and track repair
  • Latch, catch, drop bolt and striker adjustment
  • Gate braces and frame repair for sagging gates
  • Manual to automatic conversions and operator mounting
  • Rust treatment and repainting advice for iron gates
Why gates sag

Valley soil and dry heat

Expansive clay soil moves with the seasons, and a post set into it moves too. Combine that with a gate that is heavier than its hinges were rated for — common on wood gates that have soaked up years of irrigation — and sagging is inevitable. Replacing the hinges on a moving post only buys time, which is why we check the post first.

On automatic gates we also check that the operator is not fighting a misaligned gate. Forcing a dragging gate with a motor is how operators burn out, and it is a repair you pay for twice.

Repair vs replace

When a gate is worth repairing

Most gates are worth repairing. Hinges, rollers, latches, braces and posts are serviceable parts, and a well-built iron or wood gate can be brought back to square for a fraction of a new one. Repair also keeps the gate's style, which matters on a property where the gate matches the fence.

Replacement makes more sense when the frame itself has failed — rusted through at the hinge stile, cracked welds in several places, or a gate that has been bent and never re-squared. We will show you the damage and give you both numbers rather than pushing the more expensive option.

Questions

Driveway gate repair — common questions

Can a sagging gate be fixed without replacing it?

Usually yes. Replacing worn hinges, correcting the post and adjusting the latch resolves most sagging gates. If the frame itself has cracked or the gate is badly rusted through, we will tell you whether a repair is worth it or whether a new gate is the better spend.

Do you work on wood and iron gates?

Yes — ornamental iron, steel, aluminium, and wood gates including cedar and redwood. Different materials need different fixings and treatments, so we will match the repair to the gate.

My gate is automatic and stopped moving. Is that a gate or an opener problem?

It can be either. A seized hinge or a gate that has dropped on its track will stall even a healthy operator, and a failed board or limit switch will stop a gate that moves freely by hand. We test the gate manually first, then the operator, so you pay for the right repair.

Get a price

Price for driveway gate repair

Send a few details and we will call back with a firm price and the next available window. If you are not sure which service you need, describe the symptoms — that is usually enough.

  • Diagnosis on site before any work
  • Firm price approved by you, in writing
  • Parts stocked for common failures
  • Safety reverse tested before we leave

Request a free quote

Tell us what is happening with the door or gate. We will call you back with a price and the earliest service window.

Or call (877) 976-2797 — a person answers Mon–Fri 7am–7pm · Sat 8am–5pm. We only use your details to reply about this job.

Also relevant

Services people book with this one

Talk to a technician

Need driveway gate repair today?

Call (877) 976-2797 and describe what the door is doing. Most repairs are quoted on site and finished the same visit.

Call now Free quote